Anmol Chemicals is the pioneer manufacturers of Magnesium Oxide High Purity n USP BP Ph Eur Reagent FCC Food grade, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Magnesium Oxide High Purity n BP Ph Eur Reagent FCC Food grade made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Magnesium Oxide is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing Magnesium Oxide Manufacturers

Magnesium Oxide High Purity n USP BP Ph Eur Reagent FCC Food grade, CAS Number 1309-48-4 Manufacturers

Magnesium Oxide SDS of Manufacturers Specifications

Magnesium Oxide
CAS Number 1309-48-4 USP BP Ph Eur Reagent FCC Food Grades
Magnesium Oxide

We also offer High Purity 99.5% Magnesium oxide of the Grade, having consistent stable quality and characteristics.

Specifications of Magnesium Oxide USP Grade
MgO 40.30 -- CAS 1309-48-4

Magnesium Oxide, after ignition, contains not less than 96.0 percent and not more than 100.5 percent of MgO.

Identification: A solution in diluted hydrochloric acid meets the requirements of the tests for Magnesium.
Loss on ignition: Transfer to a tared platinum crucible about 500 mg, weigh accurately, and ignite at 800 ± 25 to constant weight: it loses not more than 10.0% of its weight.
Free alkali and soluble salts: Boil 2.0 g with 100 mL of water for 5 minutes in a covered beaker, and filter while hot. To 50 mL of the cooled filtrate add methyl red, and titrate with 0.10 N sulfuric acid: not more than 2.0 mL of the acid is consumed. Evaporate 25 mL of the remaining filtrate to dryness, and dry at 105 for 1 hour: not more than 10 mg of residue remains (2.0%).
Acid-insoluble substances: Mix 2 g with 75 mL of water, add hydrochloric acid in small portions, with agitation, until no more dissolves, and boil for 5 minutes. If an insoluble residue remains, filter, wash well with water until the last washing is free from chloride, and ignite: the weight of the ignited residue does not exceed 2 mg (0.1%).
Limit of calcium: the limit is 1.1%.
Heavy metals: the limit is 20 <g per g.
Iron: the limit is 0.05%.


Specifications of Light Magnesium Oxide BP Ph Eur Grade
Light Magnesia
MgO -- 40.30 -- CAS 1309-48-4
Action and use: Antacid; osmotic laxative.

DEFINITION
Content: 98.0 per cent to 100.5 per cent of MgO (ignited substance).

CHARACTERS
Appearance: Fine, white or almost white, amorphous powder.
Solubility: Practically insoluble in water. It dissolves in dilute acids with at most slight effervescence.

IDENTIFICATION
A. 15 g has an apparent volume (2.9.15) before settling of at least 100 ml.
B. Dissolve about 15 mg in 2 ml of dilute nitric acid and neutralise with dilute sodium hydroxide solution. The solution gives the reaction of magnesium.
C. Loss on ignition (see Tests).

TESTS
Solution S: Dissolve 5.0 g in a mixture of 30 ml of distilled water and 70 ml of acetic acid, boil for 2 min, cool and dilute to 100 ml with dilute acetic acid. Filter, if necessary, through a previously ignited and tared porcelain or silica filter crucible of a suitable porosity to give a clear filtrate.
Appearance of solution: Solution S is not more intensely coloured than reference solution.
Soluble substances: Maximum 2.0 per cent.
Substances insoluble in acetic acid: Maximum 0.1 per cent.
Chlorides: Maximum 0.15 per cent.
Sulphates: Maximum 1.0 per cent.
Arsenic: Maximum 4 ppm, determined on 5 ml of solution S.
Calcium: Maximum 1.5 per cent.
Iron: Maximum 0.1 per cent.
Heavy metals: Maximum 30 ppm.
Loss on ignition: Maximum 8.0 per cent, determined on 1.00 g at 900 ± 25C.


Specifications of Light Magnesium Oxide IP Grade Specifications
Light Magnesia
MgO ---- Molecular Weight.40.30
Category: Antacid, Osmotic Laxative.

Description: Very fine, light, white powder, odourless. 15g occupies a volume of about 150ml.
Solubility: Practically insoluble in water, insoluble in ethanol(95%).It dissolves in dilute acids with at most slight effervescence.

STANDARDS:
Light Magnesium Oxide contains not less than 98.0 per cent and not more than 100.5per cent of MgO, Calculated with reference to the substance ignited at 900C.

Identification:
Arsenic; Heavy metals; Sulphates; Calcium; Soluble substances; Substances insoluble in acetic acid ; Loss on ignition: Complies with the requirements stated under Heavy Magnesium Oxide using, where appropriate, solution A and residue R prepared as described therein.
Colour of Solution: Prepare Solution A and residue R as described in the test for colour of solution under Heavy Magnesium Carbonate. Solution A is not more than intensely Coloured than reference solution.
Iron: Solution complies with the limit test for iron, Appendix 3.13 (0.1%).
Chloride: 4.0ml of solution A complies with the limit test for chlorides, Appendix 3.10(0.125%)


Specifications of Magnesium Oxide FCC Food Grade
MgO Formula wt 40.30
INS: 530 CAS 1309-48-4

DESCRIPTION
Magnesium Oxide occurs as a very bulky, white powder known as Light Magnesium Oxide or as a relatively dense, white powder known as Heavy Magnesium Oxide. Five grams of Light Magnesium Oxide occupies a volume of approximately 40 to 50 mL, while 5 g of Heavy Magnesium Oxide occupies a volume of approximately 10 to 20 mL. It is soluble in dilute acids, practically insoluble in water, and insoluble in alcohol.
Function: pH control; neutralizer; anticaking agent; freeflowing agent; firming agent.

REQUIREMENTS
Labeling: Indicate whether it is Light Magnesium Oxide or Heavy Magnesium Oxide.
Identification: A solution of sample in 2.7 N hydrochloric acid gives positive tests for Magnesium.
Assay: Not less than 96.0% and not more than 100.5% of MgO after ignition.
Acid-Insoluble Substances: Not more than 0.1%.
Alkalies (Free) and Soluble Salts: Passes test.
Arsenic: Not more than 3 mg/kg.
Calcium Oxide: Not more than 1.5%.
Lead: Not more than 4 mg/kg.
Loss on Ignition: Not more than 10.0%.


Magnesium Oxide Analytical Reagent Grade
MgO
Formula Wt 40.30
CAS Number 1039-48-4

REQUIREMENTS
Assay: 95.0% MgO

MAXIMUM ALLOWABLE
Insoluble in dilute hydrochloric acid: 0.02%
Water-soluble substances: 0.4%
Loss on ignition: 2.0%
Ammonium hydroxide precipitate: 0.02%
Chloride (Cl): 0.01%
Nitrate (NO3): 0.005%
Sulfate and sulfite (as SO4): 0.02%
Barium (Ba): 0.005%
Calcium (Ca): 0.05%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.5%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.01%

Magnesium Oxide USP BP Ph Eur Reagent FCC Food Grade Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.